The crane that was lowering materials for the construction of a wine cellar turned upside down
When two cranes working to lower the water tank lifted the tank, 2 of them broke at the same time.
The lifting operation was carried out in the busiest part of the city without stopping the traffic and clearing the area
Crane overturned while lowering a heavy vehicle to the construction site.
Hangover workers drop concrete block while lifting.
As a result of the wrong intervention of the crane operator, the metal platform was smashed by sliding down
The mobile crane, which was not well-balanced at the workplace, fell over.
The mistake of the operator, who did not calculate that the crane he was working with would fall over, was very costly.
When the load to be lifted was heavy, the crane lay on its side.
The ropes of the crane broke during the unloading of the vehicle transported by the truck from the trailer.
While working with the crane, they tried to pull the electrical wires with a stick, and they touched the electrical lines to the crane.
The mobile crane, which started the operation without any support, fell in the middle of the road together with the truck bed.
Mobile crane with insufficient support overturned while lifting a load
When the crane on the truck was not mounted well, it collapsed with a light load, and the operator almost died.
Crane trying to land a dozer at a construction site turned upside down due to not good calculation
A construction crane crashed into a crowded neighborhood
A construction crane fell on a building due to excessive wind
crashed onto the ship’s deck while being lifted to reattach the ship’s anchor and was rescued from an utter fatal accident
The crane fell over because the workers who wanted to land a heavy dozer on the construction site could not calculate the weight of the dozer.
The crane, the bottom of which was not reinforced while being built, fell on the street at the most crowded time of the street.
boat rescue operation with great effort failed
the installation of the manipulator fell, the crane operator almost died
With the wind and operator error, the crane used in construction fell to the place of the houses.
The operator, who tried to lift the prefabricated buildings in the construction area, dropped the guard box due to clumsiness.
The truck crane that wanted to lift the crane walking on the rails fell over with its load
Another crane was assigned to lift the counter-rotating crane, but when the ropes of the crane to be rescued broke, it rolled downhill.
The shop selling basic foodstuffs and beverages crashed to the ground as a result of a crane error while moving the shop to a more busy...
The crane used in the construction was overturned by the effect of the extreme wind.
As a result of the crane operator’s mistake, the crane lifting the electric pole fell to the ground
ship cranes overturned due to balancing problem
The crane that fell due to the unstable crane position of the crane operator, The captain who rented a crane to launch , smashed the yacht.
When the crane operator, unloading a heavy load, set the vehicle platform unstable, the crane turned upside down
The strong and strong wind blowing in Kazakhstan, Astana, took down the construction crane. The crane fell into the building used as a warehouse.
The crane fell into the sea with the fishing vessel while the fishing vessel was lifted by a crane, which was intended to be taken ashore...