Close call in Pakistan! 😱 A massive crane struggled to lift a heavy tank and almost overturned. The operator fought hard to stabilize it at the last second. Heavy lifting operations are no joke — physics doesn’t forgive mistakes. #CraneFail #Pakistan #HeavyLift
The crane tipped over and fell onto a trailer while the excavator was being loaded.
A crane dropped some iron on a truck at a Kuwaiti construction site; thankfully, only stuff got damaged.
The crane tipped over while putting down the excavator.
While lifting the mobile crane lying on its side, the handbrake was not engaged, so the rescuer pulled the crane to turn it upright.
A crane that was lifting a new water tank to install a new one fell on the shed
While the crane was being taken apart, an accident occurred due to the beam collapsing.
The crane struggled to hold the collapsing tower, but it eventually collapsed because it couldn’t bear its weight.
Crane collapsing at the Metro construction site, causing significant damage to a nearby building
The crane gave out under the heavy load and broke when they were tearing down an old building.
The crane toppled over and the workers freaked out.
They were lifting a car to get it out from Clif, and it just dropped.
The crane overturns while lowering the container due to its heavy weight
The crane rope broke, and the concrete mixer fell into the building.
A construction crane overturned due to high winds, lying on its side.
While installing the roof, the crane lost its balance and the truck overturned.
Workers were saved from a life-threatening situation at the last minute
The tank got all messed up and flipped over while they tried to lower it off the trailer.
The factory crane slipped and fell to the ground while being dismantled for repair.
In the process of lowering the dozer to the excavation site utilizing a crane, an unfortunate incident unfolded, resulting in the simultaneous collapse of the crane and the dozer.
When an excessive load was placed on it, a big crane lost its equilibrium and fell to the ground.
A gust of wind was too much for the construction crane to withstand, causing it to topple over in a neighborhood with houses.
The crane, whose balance was disturbed while lowering the tractor into the pit, was overturned
The crane operator did not heed his friends’ warnings and put the crane on and lay back while loading.
The crane, which could not withstand the wind at the hour when the vehicles were rushing in traffic, fell on the road; the crane that fell next to a public bus did not cause death or injury.
A mobile crane saves another crane on rails they topple together
The crane that was lowering the boat into the sea fell into the sea due to the wrong calculation of the operator.
The crane that was lowering materials for the construction of a wine cellar turned upside down
When two cranes working to lower the water tank lifted the tank, 2 of them broke at the same time.
The lifting operation was carried out in the busiest part of the city without stopping the traffic and clearing the area
Crane overturned while lowering a heavy vehicle to the construction site.
Hangover workers drop concrete block while lifting.
As a result of the wrong intervention of the crane operator, the metal platform was smashed by sliding down
The mobile crane, which was not well-balanced at the workplace, fell over.
Video of overturning crane rescue operation while lifting a heavy load
The mistake of the operator, who did not calculate that the crane he was working with would fall over, was very costly.
When the load to be lifted was heavy, the crane lay on its side.
The ropes of the crane broke during the unloading of the vehicle transported by the truck from the trailer.
The mobile crane, which started the operation without any support, fell in the middle of the road together with the truck bed.
Mobile crane with insufficient support overturned while lifting a load
When the crane on the truck was not mounted well, it collapsed with a light load, and the operator almost died.
Crane trying to land a dozer at a construction site turned upside down due to not good calculation
A construction crane crashed into a crowded neighborhood
crashed onto the ship’s deck while being lifted to reattach the ship’s anchor and was rescued from an utter fatal accident
The crane fell over because the workers who wanted to land a heavy dozer on the construction site could not calculate the weight of the dozer.
The crane, the bottom of which was not reinforced while being built, fell on the street at the most crowded time of the street.
boat rescue operation with great effort failed
the installation of the manipulator fell, the crane operator almost died
With the wind and operator error, the crane used in construction fell to the place of the houses.
The operator, who tried to lift the prefabricated buildings in the construction area, dropped the guard box due to clumsiness.
